RT-20 Soldering Flux
【Introduction】
Among our newly-developed soldering flux, RT-20 features excellent performance. In consideration of method of hydrochloric acid dilution for the purpose of acid cleaning, which is common in the domestic industry at present, there are lots of inevitable losses, for example, too much acid taken away b...
Among our newly-developed soldering flux, RT-20 features excellent performance. In consideration of method of hydrochloric acid dilution for the purpose of acid cleaning, which is common in the domestic industry at present, there are lots of inevitable losses, for example, too much acid taken away by copper wire may result in unstable quality, too much solder splash may cause uneven tin soldering, generated acid gas may damage nearby bare copper products, cause occupational injury to workers or even long storage of finished wires may lead to color change. This product is designed for eliminating such kinds of deficiencies..
☆ Strong welding ability;
☆ Good cleaning effect, even tin soldering and less tin ash;
☆ High glossiness, strong ageing resistance;
☆ One-year quality guarantee.
Tinned wires (diameter lower than 0.40mm)
Mix RT-20 in accordance with the following proportion (in plastic drum)
Proportion of RT-20 vs water: 1KG: 3-5KG (0.16mm, 1:3.5)
☆ Industrial water or domestic water, free from impurity
☆ Before copper wire enters into tin furnace, paint mixed liquid on the surface evenly
25KG or 200KG/1000KG plastic drum
