SI-60 Guide Shaft Liquid
【Introduction】
Product Description
☆ After Hot-tinning copper wires coming out from tin furnace and before entering into pastern axes, absorbing such lubricating oil can isolate thin film from oxide layer;
☆ Add guide shaft liquid on the felt for absorption externally covered by white cloth with two layers; the white cloth shall be properly moist and can not make tin-plating copper wire too greasy;
☆ Do not take excessive grease along with tin-plating copper wires, or else, it may cause blistering and copper leakage upon extruding electric wires;
☆ Wool felt shall be placed after guiding drum to avoid slippage;
25KG or 170kg plastic drum
As a kind of imported guide shaft liquid, SI-60 Guide Shaft Liquid researched, developed and produced by us is applicable to tinned wires (APPLE, VIVO earphone cable, etc.), resulting in bright surface of finished wires featuring good smoothness, less tin ash and facilitating next processing.
Appearance: Colorless transparent liquid
☆ After Hot-tinning copper wires coming out from tin furnace and before entering into pastern axes, absorbing such lubricating oil can isolate thin film from oxide layer;
☆ Add guide shaft liquid on the felt for absorption externally covered by white cloth with two layers; the white cloth shall be properly moist and can not make tin-plating copper wire too greasy;
☆ Do not take excessive grease along with tin-plating copper wires, or else, it may cause blistering and copper leakage upon extruding electric wires;
☆ Wool felt shall be placed after guiding drum to avoid slippage;
☆ Absorbing guide shaft liquid by wool felt can effectively eliminate tin ash around the wire body, so as to avoid blocking eye model and thus cause wire breaking upon wire twisting.
25KG or 170kg plastic drum
